Admiral Craft HD-36 Manuel du propriétaire télécharger pdf (Page 3)

Heated Display Merchandiser Assembly Instructions

HD-26 model pictured in instructions. These instructions are for the HD-26, HD-36 and HD-48 models.

Step 1

With the back of the unit facing you, un-screw both

screws located under the top cover of the unit.

Step 2

Remove the top cover and set aside.

Step 3

Loosen the bottom screws located on the side. Do not take

the screws out all the way. Slide the glass between the posts and when

properly aligned tighten the screws.

Step 4

Repeat step 3 for the other side glass.

Step 5

Put top cover back on and tighten screws (leave a little

loose for ﬁ tting the front glass pieces in).

Step 6

Insert the top of the front left glass into the top inner slot.

Then place the bottom of the front left glass into the bottom

inner slot. If need be, lift up the top cover a bit to ﬁ t glass in under.

Remember to hold onto side glass pieces so they don’t fall out.

1 2 3 4 5 6 7 8

Pas de commentaire

Admiral Craft HD-36 Manuel du propriétaire Page 3